Facebook Pixel

 

Bitspower VG-N980TIAST Acrylic (RGB LED Version) for ASUS STRIX-GTX980TI

Bitspower VG-N980TIAST Acrylic (RGB LED Version) for ASUS STRIX-GTX980TI

EK-FC1070 GTX-Nickel Plated Copper Water Block with Acetal Top for Nvidia GTX 1070

EK-FC1070 GTX-Nickel Plated Copper Water Block with Acetal Top for Nvidia GTX 1070

EK-FC1070 GTX-Nickel Plated Copper Water Block with Plexi Top for Nvidia GTX 1070

SKU
EK-FC1070-GTX-NP

Estimated Delivery

Loading...
at ZIP
Order within

EK-FC1070 GTX is a high-performance full-cover water block for NVIDIA® GeForce GTX 1070 Founders Edition graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

$130.99
In stock Low Stock 3 left
More Information on Shipping

Frequently Bought Together

  1. EK-FC1070 GTX-Nickel Plated Copper Water Block with Plexi Top for Nvidia GTX 1070
  2. +
  3. EK-FC1070 GTX Black Anodized Aluminum Backplate for EK-FC1070 GTX Series Water Blocks
Total price: $0.00
  • This item: EK-FC1070 GTX-Nickel Plated Copper Water Block with Plexi Top for Nvidia GTX 1070 $130.99

EK-FC1070 GTX is a high-performance full-cover water block for NVIDIA® GeForce GTX 1070 Founders Edition graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC1070 GTX water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

The base is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LED diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for a safe and painless installation procedure.

EK Water Blocks recommends the purchase of aesthetic retention backplate (EK-FC1070 GTX Backplate - Black or Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.

G1/4" threaded fittings can be used on both sides of the FC Terminal. Up to four EK-FC1070 GTX water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.

Enclosed:
- EK-FC1070 GTX series water block 
- Mounting mechanism with screw-in brass standoffs
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

PLEASE NOTE:

  • Due to immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site.
  • NVIDIA® GeForce GTX 1070 factory backplate is not compatible with this water block!
  • New NVIDIA® SLI HB bridges are not compatible with this water block. You can still use regular SLI bridge that comes with every SLI supported motherboard.
  • EK-FC1070 GTX is identical to the EK-FC1080 GTX with the only difference being the different engraving.

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Prepared for LED Diode 3mm
Chip Manufacturer Nvidia GeForce
Write Your Own Review
You're reviewing:EK-FC1070 GTX-Nickel Plated Copper Water Block with Plexi Top for Nvidia GTX 1070
Your Rating

Questions & Answers

Search Q/A
Sort by
Expand All +
pdf
insta1070.pdf (1.06 MB) Download
pdf
1070 comp.pdf (91.21 KB) Download
Download PDF Download PDF
We found other products you might like!
Recently Viewed
No recently views items
Clear All
Please select a wishlist