HEATKILLER® IV for GTX 1080 and 1070 FTW/FTW2 - ACRYL
The HEATKILLER® IV VGA series is the result of 15 years of experience in design and manufacture of high-performance water cooling equipment. Only the best of the previous generation was merged with the HEATKILLER® IV VGA Series to provide an even more powerful water block.
The HEATKILLER® IV VGA series is the climax of 15 years of experience in designing and manufacturing high-performance water cooling equipment. Only the best features of the previous generations were merged together to provide an even more powerful water block.
We continued the GPU cooling structure of the successful HEATKILLER® GPU-X³ series and enhanced it with the central flow design, already known from the HEATKILLER® GPU-X² series. Then, we did some improvements: the combination of an extremely fine microstructure right above the GPU and a reduced residual base thickness deliver even better cooling performance. We also improved the overall flow rates by constructing all channels as wide as possible. All relevant secondary components, such as memory or voltage regulation modules are also directly cooled by the coolant.
Another highlight of the HEATKILLER® IV for EVGA FTW series is hidden under the front cover: you can find a precision milled groove in the acrylic glass here. This groove is the perfect preparation to illuminate your water block with a LED strip. An RGB-LED strip is separately available that can be directly connected to the 4pin header found on FTW version cards.
Thanks to preinstalled insulating spacers, the installation of the block onto the graphics card is really simple. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction.
The HEATKILLER® IV VGA series is manufactured from high-quality materials only: we only use highly purified electrolytic copper and the original PLEXIGLAS® GS from EVONIK for our products. All our products are completely manufactured on our own modern machinery park in our own workshop in Germany.
In order to connect several HEATKILLER® IV VGA water blocks in a Crossfire/SLI setup, the GPU-X Dual-Link and GPU-X Multi-Link accessories are sold separately. A backplate is also available.
Material: electrolytic copper, stainless steel, POM, PLEXIGLAS® GS
Connector: 4x G ¼ Inch (DIN ISO 228-1)
Pressure tested: 2 bar
EVGA GTX 1070 FTW Gaming ACX 3.0
EVGA GTX 1070 FTW DT Gaming ACX 3.0
EVGA GTX 1070 FTW2 Gaming iCX
EVGA GTX 1070 FTW2 DT Gaming iCX
EVGA GTX 1080 FTW Gaming ACX 3.0
EVGA GTX 1080 FTW DT Gaming ACX 3.0
EVGA GTX 1080 FTW2 Gaming iCX
EVGA GTX 1080 FTW2 DT Gaming iCX
Scope of delivery:
1x HEATKILLER® IV for GTX 1080 and 1070 FTW/FTW2 - ACRYL
1x Mounting material / manual
Note: Does not include LED strip.