EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tubes in order to prevent gasket (O-ring) damage.
Frequently Bought Together
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tubes in order to prevent gasket (O-ring) damage.
Technical data:
- Material: PETG
- Inner diameter: 10 mm
- Outer diameter: 12 mm
- Length: 1000 mm (39.4")
The package contains 2 pieces of tube only. Please purchase EK-HDÂ Adapter or EK-HDC compression fittings separately!
For easier installation we recommend wetting the gasket (O-ring) using drops of water prior to installing solid tube.
PLEASE NOTE:
- Please note that 10/12 PETG tubing is prone to deforming if the loop constantly runs on higher temperatures, which could lead to coolant leaking!
- To prevent any PETG tube deformation, EK recommends the use of EK PETG Inserts.