Perfect for use with acrylic sheet and tube. Includes four (4) precision point disposable application tips. Does not dissolve or scar plastics the way solvent welding type adhesives can so you get perfect aesthetically correct parts.
Frequently Bought Together
Perfect for use with acrylic sheet and tube.
Includes four (4) precision point disposable application tips.
Does not dissolve or scar plastics the way solvent welding type adhesives can so you get perfect aesthetically correct parts.
UV cure adhesive allows for very long work times so you can take all the time you need to position your parts, wipe off any squeeze out, and make sure everything is the way you want it. Once it is, you can “kick off” the adhesive by applying UV light with either a UV cure light or by placing the part/s in direct sun light for a few minutes.
Care should be taken to ensure that your work space does not have UV light present as this will cause the adhesive to cure prematurely—so no open/uncovered windows or doors and no UV lights, (like grow lights). Standard incandescent or fluorescent lights have no effect and are fine.
At least one of the parts being bonded together must be transparent so the UV light can expose the adhesive on the joint area. The bottle should be stored in a cool dark place when not in use.
CAUTIONS:
COMBUSTIBLE LIQUID AND VAPOR. HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED. DO NOT SPRAY. DO NOT HEAT. MAY CAUSE ALLERGIC SKIN REACTION. CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION. USE IN A WELL VENTILATED AREA. FOR SKIN CONTACT: WASH SKIN WITH SOAP AND WATER. FOR EYE CONTACT: FLUSH WITH COPIUS AMOUNTS OF WATER FOR 15 MINUTES HOLDING EYELIDS OPEN AT ALL TIMES. IF SWALLOWED DO NOT INDUCE VOMITING. SEEK IMMEDIATE MEDICAL ATTENTION. KEEP OUT OF CHILDREN’S REACH AT ALL TIMES. DO NOT REMOVE THE BOTTLE LABEL.