PrimoChill 3/8in OD Rigid Tube Silicone Bending Insert Tube – 3 Foot (for 3/8in ID Rigid Tube)
The PrimoChill 3/8in. OD Rigid Tube Silicon Bending Insert – 3 Foot is used for bending the PrimoChill Rigid Tubing (3/8in. ID). This silicone insert tube allows the rigid tube to be heated and bent without it collapsing. Of the 3 bending inserts Primochill offers, this insert tube is the easiest to insert into the rigid tube and as well as pulling out the insert from the rigid tube once bent. We recommend this insert tube for users new to the rigid tube bending practice for computer water cooling lines.
Notes: This Silicone bending insert only works with 3/8″ ID tube. Sold in 3 foot sections. An order of 2 would result in 2x 3 foot pieces.
Dimensions 12 x .4 x .4 in
Warning/Cautions With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.