PrimoChilll 3/8" ID Rigid Tube Silicon Bending Insert Expert - 1 Foot (for 1/2" OD Tube)

The PrimoChill 3/8in.OD Rigid Tube Silicone Bending Insert Tube – Expert is used for bending the PrimoChill Rigid Tubing (3/8 in. ID). This insert allows the rigid tube to be heated and bent with minimal tube deformation in the bends. The tighter fitting expert insert allows for flawless bends. The drawback from this expert version is the difficulty of inserting the tube into your rigid tube. Experience in bending rigid tube is needed if you plan on using this bending insert.

Notes:This Silicone bending insert only works with 3/8″ ID tube. Sold by the foot, a quantity of 3 would result in a single 3 foot piece

Expert: This insert tube is the tightest silicone insert for bending rigid tube. This insert was designed for experienced users that wanted the best possible bends out of their rigid tubing. Prepping the insert by “sanding” may be necessary depending on the how tight the rigid tube is.

Warning/Cautions With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.