F6s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (Velcro, tape, etc.)
The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices.
F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses.
This New sleeving is the BOMB for those of you that do not want to take your connectors off your PSU and cables! This stuff goes on easy as pie and looks even better than standard PET because it is NOT SEE THROUGH!!! You can use this with a zip tie to secure or you do not have to use anything on the ends f you wish. You could even use this great stuff with heatshrink on the ends to have that real finished look and, again. NOT SEE ANY OF THE WIRES INSIDE! This is great stuff and highly recommended by PPCS. IF you are in a hurry to sleeve up your PSU or case and want a nice finished look then this is the sleeve for you!
The large overlap allows easy installation over splices and inline connectors without exposing wires and cables.
Features:
Easy, Cost & Labor Effective Installation
More Flexible Than Split Convoluted or Spiral Wrap
Soft and Quiet In High Vibration Uses
25% Edge Overlap
Cut & Abrasion Resistant
Chemically Inert
Halogen Free
Retains Shape and Rigidity Throughout -75°C to 125°C Temperature Range
Melt Temp 230°C
Specifications:
This product is sold and priced BY THE FOOT. The is cut to order and non-returnable for any reason.
F6s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (Velcro, tape, etc.)
The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices.
F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses.
This New sleeving is the BOMB for those of you that do not want to take your connectors off your PSU and cables! This stuff goes on easy as pie and looks even better than standard PET because it is NOT SEE THROUGH!!! You can use this with a zip tie to secure or you do not have to use anything on the ends f you wish. You could even use this great stuff with heatshrink on the ends to have that real finished look and, again. NOT SEE ANY OF THE WIRES INSIDE! This is great stuff and highly recommended by PPCS. IF you are in a hurry to sleeve up your PSU or case and want a nice finished look then this is the sleeve for you!
The large overlap allows easy installation over splices and inline connectors without exposing wires and cables.
Features:
Easy, Cost & Labor Effective Installation
More Flexible Than Split Convoluted or Spiral Wrap
Soft and Quiet In High Vibration Uses
25% Edge Overlap
Cut & Abrasion Resistant
Chemically Inert
Halogen Free
Retains Shape and Rigidity Throughout -75°C to 125°C Temperature Range
Melt Temp 230°C
Specifications:
This product is sold and priced BY THE FOOT. The is cut to order and non-returnable for any reason.
https://www.performance-pcs.com/techflex-f6-semi-rigid-wrappable-split-braided-sleeving-1-black-f6n1-00bk.html5746Techflex F6 Semi-rigid Wrappable Split Braided Sleeving 1" - Blackhttps://www.performance-pcs.com/media/catalog/product/t/m/tmptechflexf6n_01_4.jpg1.751.7500USDInStock/Wire Management/Spiral Wrap<h3><font face="Tahoma">Product Details:</font></h3><p><font face="Tahoma" size="2">F6s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (Velcro, tape, etc.)</font></p><p><font face="Tahoma" size="2">The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices. </font></p><p><font face="Tahoma" size="2">F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses. </font></p><p><font face="Tahoma" size="2">This New sleeving is the <b>BOMB</b> for those of you that do not want to take your connectors off your PSU and cables! This stuff goes on easy as pie and looks even better than standard PET because it is <b>NOT SEE THROUGH!!! </b>You can use this with a zip tie to secure or you do not have to use anything on the ends f you wish. You could even use this great stuff with heatshrink on the ends to have that real finished look and, again. <b>NOT SEE ANY OF THE WIRES INSIDE</b>! This is great stuff and highly recommended by PPCS. IF you are in a hurry to sleeve up your PSU or case and want a nice finished look then this is the sleeve for you!</font></p><font face="Tahoma" size="2"><p><img width="175" height="158" src="/media/descriptions/26713-f6graphic.jpg" /><br /> </p><p><span class="style10"><font face="Verdana" size="2"><strong>The large overlap allows easy installation over splices and inline connectors without exposing wires and cables. </strong></font></span></p></font><font face="Tahoma" size="2"><p><strong>Features:</strong></p><ul><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Easy, Cost & Labor Effective Installation</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">More Flexible Than Split Convoluted or Spiral Wrap </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Soft and Quiet In High Vibration Uses</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">25% Edge Overlap</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Cut & Abrasion Resistant</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Chemically Inert </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Halogen Free </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Retains Shape and Rigidity Throughout -75°C to 125°C Temperature Range </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Melt Temp 230°C</font></span></p></li></ul><p><b>Specifications:</b> </p><p><span class="style2"><img width="585" height="178" src="/media/descriptions/26713-f6nchart.jpg" /></span></p></font><p><font face="Tahoma" size="2"> <img width="47" hspace="15" height="68" src="/media/descriptions/26713-RoHS-Logo-sm.jpg" /></font></p><p><font face="Tahoma" size="2"><b>This product is sold and priced BY THE FOOT. The is cut to order and non-returnable for any reason.</b></font></p> <h3><font face="Tahoma">Product Details:</font></h3><p><font face="Tahoma" size="2">F6s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (Velcro, tape, etc.)</font></p><p><font face="Tahoma" size="2">The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices. </font></p><p><font face="Tahoma" size="2">F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses. </font></p><p><font face="Tahoma" size="2">This New sleeving is the <b>BOMB</b> for those of you that do not want to take your connectors off your PSU and cables! This stuff goes on easy as pie and looks even better than standard PET because it is <b>NOT SEE THROUGH!!! </b>You can use this with a zip tie to secure or you do not have to use anything on the ends f you wish. You could even use this great stuff with heatshrink on the ends to have that real finished look and, again. <b>NOT SEE ANY OF THE WIRES INSIDE</b>! This is great stuff and highly recommended by PPCS. IF you are in a hurry to sleeve up your PSU or case and want a nice finished look then this is the sleeve for you!</font></p><font face="Tahoma" size="2"><p><img width="175" height="158" src="/media/descriptions/26713-f6graphic.jpg" /><br /> </p><p><span class="style10"><font face="Verdana" size="2"><strong>The large overlap allows easy installation over splices and inline connectors without exposing wires and cables. </strong></font></span></p></font><font face="Tahoma" size="2"><p><strong>Features:</strong></p><ul><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Easy, Cost & Labor Effective Installation</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">More Flexible Than Split Convoluted or Spiral Wrap </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Soft and Quiet In High Vibration Uses</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">25% Edge Overlap</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Cut & Abrasion Resistant</font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Chemically Inert </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Halogen Free </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Retains Shape and Rigidity Throughout -75°C to 125°C Temperature Range </font></span></p></li><li><p class="style6"><span style="font-weight: 400;"><font face="Tahoma" color="#000000" size="2">Melt Temp 230°C</font></span></p></li></ul><p><b>Specifications:</b> </p><p><span class="style2"><img width="585" height="178" src="/media/descriptions/26713-f6nchart.jpg" /></span></p></font><p><font face="Tahoma" size="2"> <img width="47" hspace="15" height="68" src="/media/descriptions/26713-RoHS-Logo-sm.jpg" /></font></p><p><font face="Tahoma" size="2"><b>This product is sold and priced BY THE FOOT. The is cut to order and non-returnable for any reason.</b></font></p>Techflex00https://www.performance-pcs.com/media/catalog/product/t/m/tmptechflexf6n_06_4.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmptechflexf6n_02_4.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmptechflexf6n_03_4.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmptechflexf6n_04_4.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmptechflexf6n_05_4.jpg0.9100add-to-cartTechflexBlack1"