Facebook Pixel

 

Bitspower Metal Tubing Cutter

Bitspower Metal Tubing Cutter

XSPC Acrylic/PETG Easy Cut / Easy Bend Toolkit

XSPC Acrylic/PETG Easy Cut / Easy Bend Toolkit

XSPC Acrylic/PETG Easy Cut / Easy Bend Toolkit

SKU
XSPC-BEND-KIT

Estimated Delivery

Loading...
at ZIP
Order within

The Acrylic/PETG Easy Cut / Easy Bend Toolkit, takes the hard work out of using rigid tubing. .

$15.95
In stock Good Stock 10 left
More Information on Shipping

The Acrylic/PETG Easy Cut / Easy Bend Toolkit, takes the hard work out of using rigid tubing. These kits are made for tubing with 10mm inner diameter and 12-14 outer diameter. Just follow these simple steps:

  1. Insert the Bending Rubber into the acrylic/PETG tube
  2. Heat the tube at the bend point, using a heat gun or hair dryer (not supplied)
  3. Insert the heated tube into the acrylic/PETG Easy Bending Tool
  4. Bend the tube to the required radius and allow to cool
  5. Remove the Bending Rubber from the tube
  6. Use the Heavy Duty Hose Cutter to trim the tube to the required length
  7. Insert each end of the trimmed tube to the acrylic/PETG Chamfer tool and rotate anticlockwise
  8. Use the Sand Paper to clean up the chamfered edges

** NOTE" Silicon bend chord can shrink by nearly 4% with drops in the temperature from 35C to 15C. On a loose fit in your tube, XSPC's advises customers to soak the chord in warm water before use.

Kit includes:

  • Heavy Duty Hose Cutter - The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
  • PETG Easy Bending Tool - This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube.
  • Bending Rubber - Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming.
  • PETG Chamfer Tool - Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
  • PETG Edging Sandpaper - Ideal for sanding the edges of PETG tubing, after using a chamfer tool.
Write Your Own Review
You're reviewing:XSPC Acrylic/PETG Easy Cut / Easy Bend Toolkit
Your Rating

Questions & Answers

Search Q/A
Sort by
Expand All +
Download PDF Download PDF
We found other products you might like!
Recently Viewed
No recently views items
Clear All
Please select a wishlist